New Phone - SE K660i
Finally , after about 6 month looking for decent phone, now I am a proud owner of Sony Ericsson K660i.
Cheap 3G/HSDPA phone, nice design and most important, fit on my tight budget :).
Went to Maxis Center at Kotaraya yesterday and subscribe to Unlimited Data Package (RM99) + New Plan 50.
Now at the office and trying to connect to 3G using this phone as modem. Run wvdial
sicksand@sicksand-laptop:~$ sudo wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf’.Scanning your serial ports for a modem.
Modem Port Scan: S0 S1 S2 S3
WvModem: Cannot get information for serial port.
ttyACM0: ATQ0 V1 E1 — OK
ttyACM0: ATQ0 V1 E1 Z — OK
ttyACM0: ATQ0 V1 E1 S0=0 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0: Modem Identifier: ATI — Sony Ericsson K660
ttyACM0: Speed 4800: AT — OK
ttyACM0: Speed 9600: AT — OK
ttyACM0: Speed 19200: AT — OK
ttyACM0: Speed 38400: AT — OK
ttyACM0: Speed 57600: AT — OK
ttyACM0: Speed 115200: AT — OK
ttyACM0: Speed 230400: AT — OK
ttyACM0: Speed 460800: AT — OK
ttyACM0: Max speed is 460800; that should be safe.
ttyACM0: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem: Cannot get information for serial port.
ttyACM1: ATQ0 V1 E1 — OK
ttyACM1: ATQ0 V1 E1 Z — OK
ttyACM1: ATQ0 V1 E1 S0=0 — OK
ttyACM1: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM1: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM1: Modem Identifier: ATI — Sony Ericsson K660
ttyACM1: Speed 4800: AT — OK
ttyACM1: Speed 9600: AT — OK
ttyACM1: Speed 19200: AT — OK
ttyACM1: Speed 38400: AT — OK
ttyACM1: Speed 57600: AT — OK
ttyACM1: Speed 115200: AT — OK
ttyACM1: Speed 230400: AT — OK
ttyACM1: Speed 460800: AT — OK
ttyACM1: Max speed is 460800; that should be safe.
ttyACM1: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OKFound an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0”
ttyACM1: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0”
gladly it detect and my wvdial.conf look like this
[Dialer Defaults]
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = USB Modem
Phone = *99#
ISDN = 0
Username = maxis
Init1 = ATZ
Password = wap
Modem = /dev/ttyACM0
Baud = 460800
but after I ran wvdial, got this error
—> Sending: ATZ
ATZ
OK
—> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
—> Modem initialized.
—> Cannot get information for serial port.
—> Initializing modem.
—> Sending: ATZ
ATZ
OK
—> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
—> Modem initialized.
—> Sending: ATDT*99#
—> Waiting for carrier.
ATDT*99#
~[7f]}#@!}!}!} }9}#}%B#}%}(}”}’}”}”}&} } } } }%}&G[7f]MA[[1a]~
CONNECT
—> Carrier detected. Waiting for prompt.
~[7f]}#@!}!}”} }9}#}%B#}%}(}”}’}”}”}&} } } } }%}&G[7f]MA}7w~
—> PPP negotiation detected.
—> Starting pppd at Tue May 6 12:23:16 2008
—> Pid of pppd: 6328
—> Using interface ppp0
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> pppd: ��[06][08]`�[06][08]
—> Disconnecting at Tue May 6 12:23:17 2008
—> The PPP daemon has died: A modem hung up the phone (exit code = 16)
—> man pppd explains pppd error codes in more detail.
—> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
Can anyone on planet here help me out this problems.
UPDATE 6th May 2008 17:08PM
Success connected to 3g, using gnome-ppp and add unet
[Dialer Defaults]
Modem = /dev/ttyACM0
ISDN = off
Modem Type = Analog Modem
Baud = 460800
Init = ATX3
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”unet”
Init4 =
Init5 =
Init6 =
Init7 =
Init8 =
Init9 =
Phone = *99#
Phone1 = *99#
Phone2 =
Phone3 =
Phone4 =
Dial Prefix =
Dial Attempts = 1
Dial Command = ATM0L0DT
Ask Password = off
Password = wap
Username = maxis
Auto Reconnect = on
Abort on Busy = on
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = off
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = on
;Do NOT edit this file by hand!
